Three Of The Biggest Catastrophes In Peugeot 308 Key Fob History

Peugeot 308 Key Fob Replacement

Peugeot's 308 may be slightly old however it's still eye-catching. It's not the most luxurious car in its class, but it is a relaxing and civilised driving experience.

We often receive requests from Coded Car Keys to replace peugeot key fobs. If the issue is ongoing or continuous the following suggestions should help.

Water Damage

If you accidentally drop your key fob in a puddle or it gets wet while kayaking canoeing or rafting or canyoning it is likely to be damaged by water. Keep your key fob in a dry bag whenever you go outside or engage in activities that could expose it to large amounts of water.

It's also crucial to make sure that the fob has dried out prior to opening it and use it again. If you detect any odors from the fob (such as industrial liquid or windshield washer fluid), this is another indication that it's been submerged.

A wet circuit could cause the battery's charge to be drained or even explode. If you are able to get your 308 keyfob out of the water, turn the button side up and shake as much water as possible before opening the casing. Take the battery out, and then wipe the circuit board clean using a cotton swab which has been dipped in 90-percent alcohol.

Other reasons your Peugeot 308 remote keyless entry system could stop working include a dead battery for your coin problems with the receiver module signal interference, a faulty electronic chip. If none of the above are the reason you can reset the system by disconnecting the 12 volt battery from the car for 15 minutes.

Dead Coin Battery

Peugeot cars are equipped with a remote-start system which allows the driver to start the car from afar while warming up or cooling down the vehicle prior to entering. This feature is extremely useful particularly during the cold winter months. The remote start system may stop working for a variety reasons, including the battery being dead.

The coin-shaped battery contained inside the key fob will last between two and four months, depending on the frequency with which it is utilized, the place it was purchased, and how it is used. The date of use will be printed on the package or mentioned in the user's manual.

If the key fob stopped working after being exposed to clean tapwater, take out the battery and clean the electronic chip using a paper towel soaked in isopropyl ethanol. Then, dry the chip thoroughly before replacing. In case of exposure to soapy or salty water, the chip could be damaged and you'll have to replace the key fob entirely.

If you're not sure whether the battery is defective, you can check the voltage using a multimeter connected to both the plus and minus terminals. The voltage should range from 12-13 volts, peugeot key but if it's lower, the battery should be replaced. You can also reset the computer that is onboard by disconnecting and reconnecting the 12 volt batteries in reverse order. (positive cable first, then negative cable). The engine should be able to start after this.

Faulty Receiver Module

If you aren't seeing the "Key Detected" It could be that your receiver module is faulty. It's the part that transmits an indication to the car when your key fob is activated which also acts as an immobiliser, and stops it from starting until the correct key is present.

This could be due to a range of reasons, including water damage or simply the aging process. If the electronic chip inside your Peugeot 308 keyfob has been damaged due to dirty tap water, it could be because the keyfob was in contact with it. In this scenario, you'll need to take it out and thoroughly clean it with isopropyl or electronic cleaner. When the battery is dry then you can try again.

If the issue persists you're probably in need of a idea to see a local Peugeot specialist or locksmith. They can use an instrument for diagnosing to pinpoint the problem and repair it.

The loss of your Peugeot keys to your car can be an extremely stressful experience. However, a qualified auto locksmith can fix the problem in minutes. They can cut a new key and programme it to your vehicle, ensuring that you're back to the road as fast as you can. Click here to find a locksmith near you.

Faulty electronic chip

The electronic chip that is in the peugeot 307 key replacement 308 key fob is a critical role in the remote control system. If it is damaged, your car might not start or you might receive a message stating "anti-theft active". In this scenario, the only solution is to replace the key. Fortunately, professional auto locksmiths can complete the task in the shortest time.

The chip inside your Peugeot 308's key fob may become faulty for various reasons, including water damage, sweat or dirt. If your Peugeot key fob was exposed to soapy or dirty water, it needs to be cleaned right away. You can clean the electronic component with paper towels soaked with isopropyl Alcohol. After that, you should let the battery completely dry.

Radio interference can cause a key fob's functionality to cease. This could be caused by other devices that operate on the same frequency as your Peugeot key fob. It could be caused by bad conditions or objects near to the vehicle. It is recommended that you visit a Peugeot dealer in the event of this issue.

The Peugeot Key Fob 207/308 is very delicate and requires special attention. It is imperative not to drop or throw the key fob. If you lose something, try to locate it as soon as you are able to. You can reset all the on-board computers by disconnecting the 12 volt battery for a few minutes. Unplug the negative cable prior to the positive.