A New Trend In Repairs To Upvc Windows
Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like aluminum or timber.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and improve energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.
For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
If you're planning attempt to remove the glass panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not onto the floor, where they could be trampled.
It's a great idea seal the gap after the glass is removed. This will prevent drafts and water from entering your property until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap between the window repairs and the door is substantial, you may want to use security screens that includes an opening. This will give you the best of both.
2. Sagging
Upvc is a long-lasting and energy efficient alternative to timber sash window. Over time, they can develop a variety of issues that include sliding. A sagging uPVC window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.
Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and check for fit. If you are happy with the fit of your window, you can tighten screws to keep them in the right position.
If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.
uPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and perform an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then, turn the mechanism into position.
3. Water Leaks
It is essential to act if you awake each day to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a fairly simple fix that can be done by any competent DIYer. Depending on how serious the issue is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.
Make sure that the drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you may need to think about replacing the window.
Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.
If the leakage is occurring between the double-glazed glass it is more likely the issue is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges may be to blame when your uPVC window is difficult to open or it opens in a breeze. They can be replaced by any competent DIYer and are usually completed in just a few minutes.
Like all mechanical parts hinges are prone to be damaged over time. It is an easy procedure, but it is simpler if you have someone to help you hold the frame up.
Make sure that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.
Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or by poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to offer suggestions.
It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.
5. Draughts
Draughts in upvc windows can be caused by a variety of different things. First, the hinges due to wear and tear can become misaligned, this will cause a gap to form between the sash and the frame. If they are beyond repair, it might be necessary to get them re-aligned. Second, the interlock can also become misaligned. This happens on the hinge side and might require to be cleaned. In certain instances, it may be necessary to replace them.
These seals can wear down or be damaged over time, allowing air escape. Installing high-quality weatherstripping can help stop draughts. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen the possibility of draughts.
Another, and most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be placed on the windowsill on top. They can help keep cold air out and keep your home warm and window repairs cozy!
Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a life span and there may come a point where it is more economical to replace them than repair them. If you encounter any issues with your Upvc window it is recommended to speak with an expert as soon as possible.