A How-To Guide For Ghost Immobiliser From Start To Finish

Why You Need a Ghost 2 Immobiliser Fitting Near Me

Modern day thieves can take vehicles in less than a minute. They make use of the OBD port of the vehicle to hack into the ECU and then duplicate a key, all using an unprotected laptop inside the vehicle.

The Autowatch Ghost immobiliser will prevent this by sending pin codes to buttons on your vehicle (steering wheels & central console). It is completely invisible to anyone inside your car.

There are no key fobs or LED indicators to reveal the location of the vehicle.

If you're looking for a solution to stop keyless entry theft or key cloning then look no further than the ghost immobiliser. This device is designed to protect your vehicle against these types of attacks by blocking the engine after a valid pin code has been entered. This is a highly effective method of safeguarding your vehicle, and car insurance companies recognise it as a precautionary measure that can help reduce the cost of your insurance.

The way that the ghost operates is through connecting to your vehicle's CAN data network. Once installed by us at Car Theft Solutions it will only start when you press the specific sequence of buttons with your personalised override code. This means that any attempt to start the vehicle without entering this code will be greeted with a loud siren, and the engine won't start. The criminal will realize that they've been caught and are likely to abandon the vehicle and escape.

One of the main advantages of this system is that it doesn't transmit any signals, like a tracker, this means that thieves cannot make use of RF signal receivers to locate your Ghost device. It does not emit any IR (infrared signals) like typical remote control key fobs and trackers, making it difficult to hack or bypass.

Another benefit of the ghost is that it features a valet mode that can be activated when you surrender your vehicle to valet parking or for servicing. This will turn off the immobiliser CAN for 30 mph and allow you to drive just as normal by using your key fob. The Ghost will be fully functional when the vehicle is returned to its parked position.

Car Theft Solutions is the place to contact for information more about Ghost or in the event that you would like to install it in your vehicle. We are a family-run business with more than 10 years' experience in security for vehicles. This includes the Ghost immobiliser installation. We are a Thatcham-approved installer for Ghost products and our reputation is built on the satisfaction of our customers.

No cloning, hacking or modifying

The Autowatch Ghost immobiliser is one of most advanced on the market. It protects your vehicle from hacking and key cloning, making it nearly impossible to steal. The only way thieves could steal your car is by physically towing it away, and even then they won't be capable of starting the engine.

This is because, unlike other immobilisers that only prevent the vehicle from starting if they don't have your fob, this clever system actually disconnects the engine control unit so that the vehicle can't be started. It operates by sending a signal through buttons on your steering wheel, door panel or centre console that can only be deactivated by entering the proper pin code configuration This feature that makes the Ghost difficult to break.

Its sleek and subtle design allows it to seamlessly into your car without the requirement for additional keys or LED indicators. It operates independently of your factory alarm or tracker. It is a CAN-bus immobiliser, which means it is part of the vehicle's control network and does no interfere with existing devices, such as your car's key fob or alarm.

This unique technology is not easily detected by thieves, unlike other systems that employ codes and RF scanning. It only transmits pin codes silently through the buttons on your vehicle's steering wheel, door panels, or central console. The Ghost is an innovative device that protects your vehicle from keyless entry and smart key theft by producing an individual, unique pin code that needs to be entered to disarm it.

The number of vehicles with keyless entry that are on the road is growing. Thieves are becoming sophisticated and are using devices to clone your vehicle which can be bought online or in classifieds for under PS15. They can then use this fob that was cloned to gain entry to your vehicle. A standard vehicle immobiliser prevents the engine from starting if they have your original key fob. This does not provide enough protection and it is easy for criminals to alter or jam signals to unlock the vehicle.

Valet mode

An immobiliser that is standard on your vehicle has an electronic chip that transmits the signal when you press the key fob button. The system will then look for the specific code that was that is sent by the key to start the vehicle. If the signal isn't detected, it will simply cut off and stop the engine from getting started. This is the basic principle behind all aftermarket car immobilisers. It's a crucial measure to safeguard your car from being stolen, even if someone has your keys or an accessory that can increase the signal from your key fob.

Ghost immobilisers do more than just stop this. The system, located on the CAN Bus of your Mercedes is programmed with a unique PIN code that needs to be entered to start the vehicle. It is then secured on your app, and no one is able to access it until they have the exact pin that you have.

The system will also stop hacking, cloning and signal jamming (which could be used by thieves to get around the immobiliser on your vehicle). This means that if a thief does manage to get your car keys or key fob they won't be in a position to start your car even if they're parked within a few feet of it. They might only steal your car off flatbed trucks which is extremely unlikely.

Valet mode comes as an option with your ghost immobiliser. When activated, the car's glove box and ghost 2 immobiliser trunk will be locked, so that anyone who steals your car will not be able to take any personal items to take with them. It will also limit the speed of your Tesla so that it is unable to be driven over 70mph and disables ludicrous mode. It will also block your driver profiles and hide your home / work addresses so that nobody else has access to your private data on your Tesla dashboard.

If you would like to use your car for valet parking or service, select the 'Valet/Service' option on your dashboard app. Enter your 4-digit valet code on the touchscreen. Once you have done this the alarm functions will be disabled however it will prevent you from starting your car unless a valid pin is entered. This is a great option for those who need to give their vehicle over to others for repair, such as taxi drivers and garage mechanics.

The first-ever aftermarket CAN bus immobiliser

The Autowatch Ghost offers unparalleled security and is the only aftermarket CAN bus immobiliser in the world. It protects your car from key cloning, hacking and even key theft. This is achieved by integrating into your vehicle's current interface. It doesn't require additional remotes or fobs and instead works with the vehicle's data network, CAN. This makes it a "stealth' device.

The device is a circuit board buried inside your car's engine control unit (ECU). It works quietly. Once activated, it'll prevent the car from starting unless you enter a PIN. This is a unique code that you will receive when you make an appointment for installation. This number will be required to activate valet mode, deactivate the alarm, or permit you to leave in your friends car (if they have Ghost installed). Ghost installed as well).

It is designed in a way that it cannot be detected by anyone who is looking inside your car's interior. It does not transmit radio signals, and can only be heard when it's activated. It can be installed in a variety of locations which makes it virtually impossible to detect. It's also low-maintenance and can be used in combination with other anti-theft systems, such as trackers (Brand dependent) to offer the complete solution.

Many people opt for a ghost immobiliser as they feel that the standard security measures aren't enough to safeguard their pride and joy. Whilst physical deterrents like locking the steering wheel and wheel clamps are an excellent option, they're not really considered "theft proof" by thieves as they can be defeated quite easily using the right tools. Ghost immobilisers aren't bypassable by thieves as it is integrated into the vehicle and, if activated, will shut down the starter motor as well as the fuel system.

A ghost immobiliser near me immobiliser is installed for only PS450 - less than the cost of other products. It also helps stop your vehicle from being taken. If you're looking to provide an extra layer of protection to your car's pride and joy, contact us today so we can arrange it for you. We can take card payments or offer three months of interest-free credit through Klarna.